Access Control

This window is accessed via the Security Tab on the Virtual Server Properties window. Based on the settings of the Access Control window, connections will either be allowed to continue or terminated. In the event that an IP Address is matched on both the Allowed Access and Denied Access tabs, the connection will be denied for security purposes. The only exception to this is if an IP address matches a network range on the Denied Access tab, and is a Single Computer match on the Allowed Access tab.

There are two tabs available on this window, the Allowed Access tab and the Denied Access tab. These tabs both contain an Add… button which is described on this page for convenience.

Allowed/Denied Access

Displays the list of computers that are allowed to connect to the Virtual Server based on the Virtual Server name on the General tab of the Virtual Server Properties window. There are four options available on this tab’s screen including Add, Edit, Delete, and Lookup IP.

Add…

When you select the Add… button, a new window titled Computer will open. This window allows you to add a single computer or group of computers to the Computers Allowed or Computers Denied field.

Description

This optional field acts as a label for the computer you are adding to the Computers Allowed field.

Single computer

Select this radio button if you are only adding a single computer Computers Allowed or Computers Denied field.

IP address

Enter the IP address of the computer you want to allow to connect to the Gateway or deny it from connecting to the Gateway.

DNS Lookup

Due to the Gateway using a computer’s IP address for allowing connections, it might be necessary to lookup an IP address based off of it domain. When you select this button, a new window will open where you can type in the domain you wish to check, and resolve it to an IP address.

Group of computers

Select this radio button if you are adding multiple computers.

Subnet address

Type the subnet address of the network of computers you want to add.

Subnet mask

Type the subnet mask of the network of computers you want to add.

All computers

Selecting this radio button will add all computers to the Computers Allowed field.

Edit…

If you select an existing IP Address in the Computers Allowed field, the Edit… button will become selectable. This button opens the same window as the Add… button except the fields will already contain information based on the IP Address you selected.

Delete

If you select an IP Address from the Computers Allowed or Computers Denied field, you can click the Delete button to remove it.

Lookup IP

When you select an IP address from the Computers Allowed field or Computers Denied field, you can use the Lookup IP button to perform a reverse DNS Lookup on the IP Address. Note that this feature is only available on the Allowed Access tab.

Updated on February 19, 2018

Was this article helpful?

Related Articles

Not the solution you were looking for?
Click the link below to create a support ticket
Request Support